Weiss Install Protect – pre-construction defence

£15.08£128.26 ex. VAT

Weiss Install Protect is a pre-construction protection impregnator for paving elements. It offers short to medium term protection during the installation and the jointing process. Protecting the paving elements against common stains associated with construction sites such as oil, diesel and cement. No change to surface structure, appearance, slip resistance or colour.

  • Protects porous paving elements against staining during construction
  • Delays drying of surface mortar residue
  • Ideal for high absorbent paving elements
  • Jointing is easier and safer
  • No colour change
  • Oil repellent
Coverage is approximately 5-10 m² per 1 litre, but is highly dependent on the porosity of the surface.
  • Test a small area beforehand to ensure the finished result is satisfactory.
  • Weiss Install Protect can be applied to the upper surface of new paving elements before they are laid or applied to thoroughly cleaned surfaces before grouting.
  • Apply when the surface is between 5 – 25°C.
  • Do not dilute.
  • Apply evenly using a 4″ to 6″ brush, sponge or paint roller to a dry and clean surface.
  • Avoid coating sides and base of paving element.
  • Remove excess product using a cloth.
  • Laying may be carried out 5 – 10 minutes after application if applicable or if jointing / grouting the user should allow to dry for a minimum of 2 hours.
SKU: N/A Category: Tag:

You may also like…