Weiss Rust Remover

Removes deep rust stains from hard stones such as granite, ceramic tiles, porcelain, terracotta and natural stone. Prevents re-formation of rust.

Suitable for most types of granite and some sandstones. Not suitable on Calcareous stone like marble & limestone such as Travertine.

• For all acid-resistant paving elements
• Removes deep penetrated rust
• Inhibits new rust forming

Coverage approximately 5-10 m² per 1 litre, dependent on the extent of staining and porosity of the surface.

Directions:

• Test a small area beforehand to ensure the finished result
  is satisfactory.
• The surface to be treated must be dry and clean.
• Apply undiluted when the surface is between 5-25°C.
• Allow it to act for at least 30 minutes and for up to 5 hrs.
• Do not allow the surface to become dry.
  • Tip: Soak a cloth with Rust Remover & leave on paving surface for 3-4 hours. Helps keep the surface from drying.
• Rinse copiously with water to remove all traces.
• Finally, wash with Weiss Professional Paving Cleaner.
• After cleaning, we advise impregnation with Weiss Stain Protect Pro to obtain additional long-term protection.

100 ml sample pots can also be purchased to try out.

For More information please click here.